GE to Showcase X-ray Inspection Boosted by Advanced Flash! Filters™ Technology at IPC APEX 2014
LEWISTOWN, PENNSYLVANIA- January 27, 2014 - GE’s (NYSE: GE) Measurement & Control business will have a strong presence at IPC APEX Expo 2014, the world’s premier electronics event to be held in Las Vegas, Nevada on March 25 - 27, 2014. GE will host APEX attendees in booth #246 in the Mandalay Bay Resort & Convention Center for a series of innovative demonstrations and discussions.
For the first time in the United States, participants can experience GE’s advanced Flash! Filters™ image optimization technology, which provides outstanding image enhancement during live inspection tasks. This innovative GE technology automates the filtering process of all grey scales - which are present in each X-ray image - to optimize contrast and brightness for the human eye, resulting in faster and more reliable identification of defects. In combination with GE’sadvanced DXR digital detector arrays installed in the GE phoenix microme|x and nanome|x systems, Flash! Filters™ technology leads to significant time savings and defect coverage improvements in electronics inspection.
Flash! Filters™ is an optional feature of GE’s powerful 2D electronics inspection software package, phoenix x|act. The package, available for manual or automated X-ray inspection, sets new standards in ease-of-use and excellence in X-ray inspection performance, while offering fast and easy CAD-based programming. The solution features improved modules for intuitive BGA inspection and voiding calculation in IC die attaches and area solderings in power electronics - even in irregular shaped regions of interest. These innovations allow new and unskilled operators to gain high-quality results after minimal training. Ease-of-use functions - such as sample manipulation, wizard-guided inspection modules for easy setup, instant and clear live-imaging, live Pad ID overlay for easy defect identification and automatic report generation - enable inspectors to reach a high defect coverage after very short inspection times.
Additionally, GE informs APEX participants about its next-generation phoenix x|aminer, which features significantly enhanced live imaging quality. The improved model is equipped with an alternative flat panel detector, helping to save time in failure analysis and process control in electronics manufacturing, incoming inspection and R&D - at an attractive price performance ratio.
APEX Attendees are invited to bring samples with them to the GE booth #246, and can participate in interactive X-ray inspection demos as well as high resolution 3D CT scans, both performed on GE’s advanced phoenix nanome|x system. For more information, please visit: www.ge-mcs.com/phoenix.
About GE Oil & Gas
GE Oil & Gas works on the things that matter in the oil and gas industry. In collaboration with our customers, we push the boundaries of technology to bring energy to the world. From extraction to transportation to end use, we address today's toughest challenges in order to fuel the future.
About GE Measurement & Control
GE Measurement & Control is a leading innovator in advanced, sensor-based measurement; non-destructive testing and inspection; flow and process control; turbine, generator, and plant controls; and condition monitoring. Providing healthcare for our customers’ most critical assets, we deliver accuracy, productivity and safety to a wide range of industries, including oil & gas, power generation, aerospace, metals and transportation. Headquartered in Boston, USA, Measurement & Control has more than 40 facilities in 25 countries and is part of GE Oil & Gas. For further information, visit www.ge.com.
Contact for reader inquiries
GE Inspection Technologies, LP
50 Industrial Park Rd
Lewistown, PA 17044, USA
Tel.: 717 242 03 27
Dr. Dirk Neuber
T: +49 5031 172 124
InkHouse, for GE
Wenden Sie sich an uns
Kontaktieren Sie uns und erfahren Sie mehr darüber, wie wir die Zukunft der Industrie gestalten mit Hilfe unserer digitalen Produkte, unserer Software und unseren Servicelösungen.