flare.IQ Ultrasonic Flare Gas Software Solution
Combining our domain knowledge and proven track record in flare gas flow measurement with our world-class controls expertise, flare.IQ is a complete turnkey hardware and software solution to optimize the performance of the entire flare system. flare.IQ is pre-programmed with all required algorithms necessary to address the most difficult aspects of proper flare control. For refiners in the United States, flare.IQ is designed to help you meet the requirements of the Environmental Protection Agency's Maximum Achievable Control Technology (MACT) Petroleum Refinery Sector Rule (RSR) Part 63.670. Even if you operate a flare in a non-regulated environment, GE’s patent-pending process optimization algorithms which provide near-continuous feedback on flare performance will help drive down operational cost with reduced steam and supplemental gas consumption.
Pricing available upon request
Features and Benefits
Increase efficiency of the complete flare system
Using predictive modeling, the patent pending steam control algorithm draws correlations between the flare flow conditions in the system and the required steam input to optimize the steam flow for no visible emissions at the flare. Through patented technology, flare.IQ can overcome the latency associated with the heating value (BTU) measurement using a gas chromatograph. flare.IQ provides near-continuous feedback of the heating value in the flare gas, allowing an operator to dynamically adjust the make-up/supplemental gas flow rate to ensure the maximum burn efficiency in the flare.
Ensure compliance to RSR 63.670
flare.IQ is fully equipped with all the software algorigthms required to meet RSR 63.670, eliminating the requriement for software development. The software-based solution is housed in an easy-to-install QNX-based industrial controller that connects directly with the existing control system via Modbus TCP/IP. flare.IQ provides the control system with the provisional control set-points for both make-up/supplemental gas and steam flow rates that are in compliance with RSR 63.670.
Reduce implementation cost, time, and risk
With flare.IQ, scheduling and implementation risks to meet a compliance deadline are reduced. The pre-programmed algorithms allow the control engineer to focus on optimizing the overall operation of the flare system by reducing the need to allocate resources for programming the regulatory requirements.
|flare.IQ Datasheet (English, US Letter Size) 493 KB||English|
|Flare MACT Brochure 312 KB||English|
|Flare Engineering Compliance Study Datasheet 919 KB||English|
|flare.IQ Datasheet (Japanese) 414 KB||Japanese|
|Computational Fluid Dynamics 189 KB||English|
|Get Smart on Greenhouse Flare Gas Flow Measurement and Service 231 KB||English|
|Flare Service Agreement Brochure 406 KB||English|
|FlareCare Service Agreement Data Sheet 461 KB||English|
|Flare Flow Meter Support Service Agreement Brochure (English, US Letter Size) 406 KB||English|
|Flare Flow Meters Improve Plant Efficiency (English, US Letter) 3 MB||English|
|Flare Flow Meters Improve Plant Efficiency (Portuguese, A4) 140 KB||Portuguese|
|Flare Measurement Brochure (Spanish, A4) 5 MB||Spanish|
|Application Data Sheet_Flare Gas 44 KB||English||ZIP|
1-10 von 13
GE Measurement & Control Opens World Class Silicon Clean Room in Groby, UK
New facility brings benefits from advanced silicon processing to global customers...
GE Measurement & Control Awarded Channel Program of the Year in the Technology Category by SiriusDecisions
Billerica, Mass. – July 21, 2015 – GE Measurement &...
GE Launches the TransPort® PT900 Portable Ultrasonic Flow Meter
Clamp-On Meter Offers Improved Ease of Use, Durability and Low Cost of Ownership
BILLERICA, MA – March 30, 2017 ...
GE Releases Advanced Calibrator and HART/Foundation Fieldbus Communicator to Provide Greater Productivity in Hazardous Areas in the Process Industry
Latest Intrinsically Safe Druck DPI620 Genii IS offers world-class measurement and calibration with ATEX and IECEx Approvals
Sie suchen nach Software, einer Broschüre oder einem Handbuch?
Besuchen Sie das Download-Center. Dort finden Sie Dokumente und Software für unsere Produkte.
Wenden Sie sich an uns
Kontaktieren Sie uns und erfahren Sie mehr darüber, wie wir die Zukunft der Industrie gestalten mit Hilfe unserer digitalen Produkte, unserer Software und unseren Servicelösungen.